ELASTIC BAND FOR HAIR "WHITE DAHLIA"

Send

To make such a hair ornament you will need to cook:

- pieces of a satin white ribbon 2.5 cm wide, 5 cm long, which will need 55 pieces.
-lighter.
- large pink beads 3 pieces.
- glue gun.
- metal ruler.
- soldering iron.
- a circle with a diameter of 4.5 cm from a satin white ribbon.
- scrunchy.
Work sequence.
Of all the prepared segments, you need to put one aside from work, it will be required at the final stage of creating the decoration. The remaining ribbons are needed to make the flower petals.
To do this, the segment should be folded in half along its length, with the wrong side inward.

After this, the part must be cut off the upper corner with a soldering iron. The folded segment is laid on a wooden cutting board and pressed with a metal ruler, which will indicate the cut line. It is necessary to cut off starting from the upper left corner towards the bottom diagonally, not reaching the lower right corner by 1 cm.

This method of cutting tissue allows you to simultaneously cut off excess material and solder the additions between each other slices.
Next, the part needs to be spread so that the seam is in the middle.

Now the lower section must be burned with a lighter flame so that the fabric does not crumble. Further, the part must be turned with its face to itself and tucked at the bottom of both edges to the middle and burned with fire in this position.

The petal is made, the rest are created exactly like that. The final result should be 54 pieces.
Now you need to carefully burn the edges of the prepared circle. He will be the base of the flower. Along its edge, you need to glue with a glue gun 9 petals in a circle that will create the first row.

Then in the second row you need to glue the same 9 petals, but placing them between the two parts of the previous row.

By the same principle, the remaining petals are glued until 6 pieces remain free. The remaining details will be the last row and completion of the flower. To do this, pour a little glue into the empty middle to make the base stronger. And in the glue you need to strengthen the left petals.

In the middle of the color there is not much free space left, which should be filled with 3 large beads.

On the wrong side of the flower you need to glue the elastic for the hair, placing it in the center.

To hide the gum sticking place and make the decoration finished and neatly decorated, glue the piece of tape that was put off at the very beginning. It is necessary to cut a rounded part from it and fix it at the junction of the gum with the flower.