Share
Pin
Tweet
Send
Share
Send
Somehow I watched a video on the Internet where ordinary glass was cut with ordinary scissors under water. And under the video gathered more than a dozen comments. Some said it works, others said like all nonsense.
Naturally, in the spirit of legend destroyers, I decided to try, and actually there was a small need - to make a hole in the window for a small fan. (You know, a couple of computers in one room make themselves felt ...)
First of all, I removed the window from the hinges.
![](http://img.uaft2404.org/img/sdela-2019/rezhem-obichnoe-steklo-obichnimi-nozhnicami.jpg)
Gently tore off the slats on the sides and put out the glass.
![](http://img.uaft2404.org/img/sdela-2019/rezhem-obichnoe-steklo-obichnimi-nozhnicami-2.jpg)
He filled a small container with water and lowered the glass there. Then he took the scissors and tried to cut a piece for verification. I will not say that everything went like clockwork - there are difficulties. In general, it turned out.
![](http://img.uaft2404.org/img/sdela-2019/rezhem-obichnoe-steklo-obichnimi-nozhnicami-3.jpg)
Continuing work.
![](http://img.uaft2404.org/img/sdela-2019/rezhem-obichnoe-steklo-obichnimi-nozhnicami-4.jpg)
In fact, scissors do not cut glass, and piece by piece they break it off, so even sides are simply impossible to obtain.
![](http://img.uaft2404.org/img/sdela-2019/rezhem-obichnoe-steklo-obichnimi-nozhnicami-5.jpg)
Then it is necessary, also under water, to walk along the cut edges with sandpaper to remove nicks and chips.
After all, I inserted the glass into the frame and installed a fan.
![](http://img.uaft2404.org/img/sdela-2019/rezhem-obichnoe-steklo-obichnimi-nozhnicami-6.jpg)
When working with glass, be especially careful and careful. For example, for these simple operations I cut myself twice, well, not deeply.
Good luck
Share
Pin
Tweet
Send
Share
Send