In this review, the author shows how to make a practical transformer shelf with your own hands. A shelf is transformed into a small table.
To make this shelf, the author uses pieces of chipboard (but you can also take plywood). Also, metal strips and corner pieces are required.
The shelf consists of three tiers. Cut off pieces of chipboard of the right size. We also cut three corners across the width of these shelves.
Then the master puts all three shelves in one plane, leaving a small gap between them, and cuts a piece of metal strip along the length of three shelves.
The main stages of work
It will be necessary to weld steel pins to the strip, and drill holes at the ends of the shelves and corners.
After that, we connect all three shelves using a strip. A similar operation needs to be done on the other side of the shelves.
To the corners on which the shelves rest, you need to weld the "ears" with holes. We connect them with metal strips using pins so that the structure can be folded.
At the last stage, it remains only to paint all the details, after which you can proceed with the assembly.
For details on how to make a convenient transformer shelf for your home workshop with your own hands, see the video.
