In this review, the wizard shows the manufacturing process of a simple but useful tool that is useful for working in the garden and in the country.
With this device, you can make holes in the ground for planting young trees and bushes. Working with him is very convenient.
Also, using this tool, you can transplant already planted plants from one place to another. In general, such a homemade work will not be superfluous in a summer cottage.
First of all, the author takes a piece of pipe with a diameter of 100 mm and a length of 24 cm. In it, you will need to make a wide cut, and grind the edges of the cut.
The main stages of work
The author puts a ring from a thick bar on a piece of pipe and scalds it.
Part of the metal bar will need to be cut off by a grinder along the width of the slot made in a piece of pipe.
At the next stage, the author cuts 2 metal bars of circular cross section. It will be necessary to weld a piece of a metal plate of an arched shape to them.
For greater rigidity of the fixture handle in the middle, the author welds a small piece of the bar between the rods.
In the upper part of the fixture, perpendicular to the rods, it will be necessary to install a section of the profile pipe.
This workpiece is put directly on the rods - for this it is necessary to drill two holes in it.
After that, it will be necessary to cut off two more long rods, which are welded to the outer part of the ring on the pipe and the workpiece from the profile.
At the last stage, we weld the last part, and our homemade product is ready.
For details on how to make your own homemade tool for working in the country and in the garden, see this video.
