There is hardly a workshop or garage in which there would be no extension cord. However, conventional extension cords (especially with a large wire length of more than 20-30 meters) are very uncomfortable because they constantly strive to get confused.
In this review, the author shows how you can make a simple compact extension cable for three outlets from an ordinary plastic pipe (for installing sewage). It turns out cheap and cheerful. And practical!
The first step is to cut a circle from a piece of plywood. Three bolts must be screwed to it. Then this circle will need to be inserted into the plastic pipe.
The main stages of work
At the next stage, the master cuts another circle of the same diameter from plywood. A piece of metal pipe is screwed to it, onto which a piece of PVC pipe is then put on.
A piece of plastic pipe is screwed to a circle of plywood with sockets. Next, install the outlet. Before assembly in the extension casing, it will be necessary to make a slot for the wire.
We connect the inside of the extension cord, connect the wire to outlets, and then insert it into the housing from the sewer pipe. The bottom circle of plywood must additionally be screwed to the pipe walls with self-tapping screws.
For more information on how to make a compact extension cable for three outlets from a section of a sewer pipe with your own hands, see this video.
