How to make a simple guide for a ram holder

Pin
Send
Share
Send

When cutting threads on metal pipes or rods, it is far from always possible to exactly “push” a die on the first try. Agree that sometimes it is very annoying, especially when there is absolutely no free time.

Therefore, the author recommends making a simple guide for the die holder with your own hands, with which you can solve this problem.

First of all, it will be necessary to cut a piece of steel strip that is suitable for length using a grinder or other available tool. Having attached a die holder to it, it is necessary to make a marking for the mounting holes.

Step-by-step guide manufacturing process

First, the master drills two holes in the handles of the die holder, and then transfers them to a metal workpiece. Then a drill with a larger diameter needs to drill a central hole.

At the next stage of work, two bushings will need to be cut from an aluminum or brass tube. They will be worn on long bolts connecting a piece of metal strip with a die holder.

Next, you need to put on the die holder itself on the bolts, and fix it with two nuts. Then the handles are screwed in and a plate of the required size is inserted - the homemade product is ready for work.

For more information on how to make a simple guide for the die holder with your own hands, see the video on our website. Write in the comments, did you like this idea?

Pin
Send
Share
Send

Watch the video: X RAM MOUNT. WITH CHARGER. DIY. very simple procedure (November 2024).