Every master who deals with professional knife sharpening knows how laborious this process is. However, you can make your own hands a simple device that will help sharpen the knife at the desired angle.
Moreover, the process of sharpening any kitchen knife will take literally several minutes. By the way, materials for the manufacture of this homemade product will also need a little.
For this device you will need a small L-shaped corner, a stud or a trimmed long bolt, a cap nut (the stud and nut must have the same size - M5) and the wing nut M5.
Also for this homemade product you will need: two neodymium magnets with a hole, M3 bolts and nuts and an M5 nut with a plastic rim.
The main stages of work
Two additional holes (Ø3 mm) will need to be drilled in the metal corner, the excess will be cut off, then it will be polished and the ends rounded. The hairpin is cut to the desired size, the M3 bolts are tightened to the grovers.
Two neodymium magnets are screwed to the drilled holes of Ø3 mm using a bolt with washer and nut. Then a stud is threaded into the corner hole, the wing nut is screwed onto its 1/4 length.
The whetstone is placed on the table, a knife is attached to the fixture, the required angle is set and sharpened.
After such sharpening, kitchen knives not only cut the thinnest peel and cut the paper by weight, but also shave the hairs on the hands. The razor sharpness of a knife - in minutes! For more information on how to make a homemade device for sharpening any knives, see the video on the site.
