From the wreckage of a broken drill for a perforator, you can make a simple, but very easy to use nozzle for driving construction dowels into the wall. And for this homemade product it will be necessary to cut off part of the drill with a “shank”.
Next, it will be necessary to weld a hex nut to the workpiece. Moreover, the diameter of the nut should be such that a building nail hat is placed between the inner walls.
Then the weld will need to be grinded on an emery machine or cleaned using angle grinders. A metal washer is welded to the side surface of the drill. Previously, part of it needs to be ground.
The process of making a homemade nozzle
After the first part of the nozzle is ready, you can proceed to the next stage of work. And for this it will be necessary to cut one piece from a piece of metal plate, which will be joined by a previously welded billet.
Then you need to slightly modify the basic elements of a homemade nozzle, and then you can start painting and subsequent assembly of the entire structure. And it will take a minimum of time.
Now with this device you can hammer construction nails into the walls. For details on how to make a homemade nozzle for driving construction dowels-nails from a broken drill, see the video on our website.
