Perhaps this is one of the simplest crafts with which you can start your garage activity and the ability to use a broken open-end wrench. Disks on the grinder are often "self-tightening" because the rotation is carried out in the direction of tightening the nut and it is difficult to remove them without a special key.
For crafts, you will need a key and an old drill of not large diameter, which coincides with the dimensions on the grinder nut. First you need to mark the places for two holes, then drill them so that the cuttings of the drill fit tightly there.
Protruding steel stumps are scalded on both sides, then the welding is cleaned. It is also necessary to modify the key seat a little, this can be done by attaching the nut from the grinder and grinding off the excess metal.
# 1 Homemade key for angle grinder
submitted by 
Anton 13.04.2018, 23:50
- Report
Add entry
Picture Video Audio Text Insert code
