When you need to perform some types of work with a well-mounted sander, many craftsmen try to do this with a yew or by attaching it through a pen mount. This method combines all the known developments.
A special bracket is made from the corner, which is mounted in standard places on the angle grinder, does not interfere with work due to its compactness. In order to fit the fasteners as much as possible, it is advisable to screw the ears to the grinder and weld a connecting cross-member connecting them to which a corner is already welded.
The new device allows you to:
- Fasten vertically and horizontally in angle grinders
- Use a standard handle to tighten it instead of the mounting screw
- Fasten the grinder to a wooden surface using self-tapping screws.
- Use angle grinder in manual mode without removing this bracket
# 1 Additional mounts for grinders
submitted by 
Anton 23.03.2018, 15:53
- Report
# 2 Tool for grinder
submitted by Anton 24.03.2018, 10:11
- Report
# 3 Bracket for attaching a grinder
submitted by Anton 25.03.2018, 22:11
- Report
# 4 Mounting the grinder on a workbench
submitted by Anton 30.04.2018, 19:35
- Report
Add entry
Picture Video Audio Text Insert code
