Computer DIY

I love LEDs. They are economical, durable, and most importantly very beautiful. And I'm always looking for new ways to use them in a new way. Here, for example, is a great way to use two super bright blue LEDs and a tube 8-10 centimeters long. From these components we will make a tube similar to a neon one.

Quite often, owners of inkjet printers are faced with such a problem as a “dried cartridge”. This is because the printer has been idle for a long time. To prevent this from happening, experts advise printing one sheet at least a week on the printer. Well, if this happened and your cartridge has dried up, then I hope this method of restoring dried cartridges will help you.

We already did a similar home-made on our own, only in it did we coordinate the joystick from the Dandy set-top box with the hardware of the computer by means of a special program. Here we will simply simply remake the usual computer keyboard into a joystick. What do we need. Any keyboard (preferably with a USB bus for convenience), but naturally working.

I’m very tired of the monotonous computer desks that are at everyone’s house like a carbon copy. And I decided to make a completely original, exclusive computer desk for my beloved, with dimensions that would be convenient for me personally. In addition, a home-made computer desk is not only very healthy, but also very cheap, since all materials can be purchased at the nearest construction and plumbing stores.

Mat for fans of old computer games. To make a rug with a picture from an old computer game made up of pixel squares, you need only a little patience. From ordinary plain square rugs, you can make your own unique carpet in the style of pixel art. Gather materials and create a design For this work you will need: Multi-colored rugs - soft and shaggy rugs with a split pile in the photo, you can choose something else.

This TV stand is very easy to manufacture. This kind of stand can be assembled in a couple of hours, the size of almost any flat-screen TV. In this particular project, I will install a 32-inch flat-screen TV. The stand is high enough to make it convenient to watch TV from the bed.

This is not a tricky little thing made of PVC pipe, organizes the order in those places where there are large clusters of wires. For example, under a table where a personal computer is standing, usually there are several wires on the floor, and this is only for an ordinary user. And if the advanced? There are deposits in general: a web camera, a subwoofer with speakers, monitors, a scanner, a printer - and there is more than one wire to each device.

Under the table on which the personal computer is located, there is almost always a large number of wires that connect peripheral devices. This is very inconvenient and ugly, often interferes with normal operation. I will show you a simple way to put things in order under the table at your computer. You do not have to make any complex or simple devices.

This is a very simple way to hide the folder with the necessary documents without installing any software. You will need only a standard notebook, which is in all versions of Windows. You can access your folder with a password. 1. Open the notepad and copy this code into it: cls @ECHO OFF title Folder sdelaysam-svoimirukami.

To make nature cleaner, and life easier and more convenient I will offer you a simple and convenient way to store computer wires. As you know, if you store different wires together, they begin to get confused, intertwine, unwind and sprawl. To avoid all this, I suggest using plastic or plastic, jars or boxes of fish preserves, Korean carrots or similar products.

Now, in amateur radio practice, antennas for amplifying 3G, 4G, Wi-Fi signals of the Biquadrat type are very common. Such an antenna has a directional effect, which may not always be a virtue, but even a disadvantage. An example is this: you need to amplify the signal of your router so that you can catch it anywhere in your home.

Here I made such a simple, and most importantly, very necessary backlight, with my own hands from a Chinese lamp. After all, you can’t buy eyes, and working on a computer in a dimly lit room is very harmful to the eyes. This lamp can be bought for 100-200 rubles. It is powered by 3 finger batteries, that is - 4.5 volts.

Personal workspace largely determines the quality of the work performed, because it depends on it how comfortable and productive the work process will be. To a large extent, this applies to the desktop, which should be user-friendly. Designers and designers involved in the development of office and home furniture offer a lot of original ideas, but you can try to make your own ideas come true on your own.

Here is such a beautiful, and most importantly, a simple mouse pad for a computer mouse, everyone can do. You can’t buy one in the store! The picture can be anything, the color of the backlight, too. All homemade is made of all available materials with your own hands. We need plexiglass (can be found in construction stores), and a drill or something like that I had a very old home-made machine.

Everything unusual is always interesting and fun. In the article I will show you how to make a funny case for a flash drive from a marker. We need: 1) epoxy glue (epoxy) 2) flash drive 3) felt-tip pen according to the size of the flash drive disassemble the marker cut off the head (how to write) insert the flash drive remove the adhesive, glue all the holes with masking tape, pour the epoxy into the inside, put it closer to the battery, wait until it dries up .

HELLO TO ALL!!! I want to share with you how I made the CD-ROMA backlight. What we need: second glue, soldering accessories, wires, LEDs. I cut out the LEDs from the backlight of the mobile phone, that is, its keyboard. At the first stage, you need to install the LEDs in the holes in the tray as I did.

Turn the antenna of a regular WiFi router into an improved one, which will have a longer range, and all this can be done in 15 minutes without any cost. Very often, inexpensive WiFi routers use a narrow-band whip antenna. In fact, this is just a piece of wire. In expensive routers, there is already a longer antenna with matching turns.

This is not the first time that I am making something from PVC pipes. And I decided to share a new creation. As the name of the master class shows, I will tell you how to make a large table out of a hollow door and plastic pipes. Such a table can be used as you like: as a workbench, desk, counter in the store and even as a table for a family meal.

Hello friends! Today I will show you how to increase the range of your Wi-Fi or 3G whip antenna. This method cannot be called standard or classic, it is a discharge design - crazy hands. Yes, to be honest, I don’t even know how exactly my device works ... But it works!

Hello! I want to tell you another way how to effortlessly increase the communication distance with your Wi-Fi router. The idea is very simple: we will make a reflector or reflector from a plastic bottle and foil. Next, add it to the existing antenna and get a directional antenna instead of an omnidirectional one.