With the help of a simple home-made device for digging holes in open ground, it is possible to facilitate the planting of plants in the country house and garden.
For the manufacture of this device will require trimming metal pipes and a large steel washer. From the tool you will need a grinder, a drill and a welding machine.
The first step is to cut a piece of round pipe of suitable length (about 10-15 cm), depending on the desired depth of the hole. A steel washer is welded to the end.
The main stages of work
At the next stage, the author cuts a piece of pipe of a smaller diameter and welds it to the washer. And the weld will need to be cleaned with a grinder.
Then the author cuts another piece of the tube and welds it perpendicular to the first segment, which is welded to the washer.
Next, it will be necessary to cut a piece of round metal bar of suitable length. And you need to weld a piece of a round plate to it. This part will be inserted in the first.
Then we cut off another short piece of the steel tube, make a cutout in it and weld it to the long pipe (fixture handle).
After that, it remains only to cut the thread on the steel bar, and wind the plastic handle. Now the homemade product is completely ready.
For details on how to make a homemade device for digging holes with your own hands, see this video.
