In this review, the author shares the idea of how to make an original decor for a private house or cottage from a gas (propane) cylinder with a volume of 27 liters.
In this case, the author plans to use this design as a barbecue grill. However, you can find her another application. For example, use as a decor - in this bus you can place flower pots.
In general, if you like something like that, then we bring to your attention the step-by-step process of making a homemade barbecue grill.
First of all, it will be necessary to cut off all the excess on the cylinder. Then the master draws with chalk the windows that must be cut out with a grinder or, for example, a plasma cutter.
The main stages of work
After all the windows are cut out in the balloon, the edges must be filed to remove any burrs. You also need to make a grill cover. The master cuts it out of the wall of the cylinder, and then fastens it on hinges so that it can open.
At the next stage, it is necessary to cut off four pieces from the metal pipe, which are then welded to the cylinder. As you might have guessed, these are wheels.
From one of the ends of the pipe sections, the master welds plugs cut from a sheet of metal. Further, if desired, you can add a few decorative elements.
Then it remains only to clean and paint everything well. If you are going to use this design as a barbecue and barbecue, then you need to choose heat-resistant paint. Details in the video on the site.
